What's New
Series
Finish Collection
Special Laminate Products
New HPL Profiles
Grades/Finish Collection Guide
Adhesive Documents
Documents
LEED Documents
Photo Database
Warranties
  
GRADES FINISHES SIZES
See National Product Guide (NPG) for specific sizes for each grade and finish

GRADE DEFINITIONS
  • Grade 10 General Purpose Grade (HGS, Nominal Thickness .048" (1.2mm))
    The most widely specified grade; recommended for horizontal and vertical interior applications.
  • Grade 12 Horizontal Postforming Grade (HGP, Nominal Thickness .039" (1.0mm))
    Postformable to permit bending on suitable commercial postforming equipment. Use whenever forming is desired for decorative or functional purposes in interior applications. Optimum postforming temperature is 325°F (163°C). Note: When used with a polished finish, Grade 12 is recommended only for light duty horizontal applications.
  • Grade 20 Vertical Postforming Grade (VGP, Nominal Thickness .028" (0.7mm))
    Outside and inside radii to 3/8" (9.5mm). A forming grade designed for vertical or light duty horizontal interior applications requiring radiused edges. Thinner than Grade 12; excellent for postformed radii. Installed panel width not to exceed 24" (609.6mm) maximum.
  • Grade 32 Fire-Rated Vertical Grade (VGF, Nominal Thickness .032" (0.8mm))
    Intended for use in vertical and horizontal interior applications which require low flame spread ratings to conform to building codes. Classified by Underwriter’s Laboratories, Inc. and meets most military and marine specifications. Slightly thinner than Grade 50. Available on selected Fire-Rated Laminate items.
  • Grade 50 Fire-Rated General Purpose Grade (HGF, Nominal Thickness .048" (1.2mm))
    Intended for use in vertical and horizontal interior applications which require low flame spread ratings to conform to building codes. Classified by Underwriter’s Laboratories, Inc. and meets most military and marine specifications. Available on selected Fire-Rated Laminate items.
  • Grade 54 Vertical Dimensional Grade (VGD, Nominal Thickness .047" (1.2mm))
    Dimensional laminate for vertical interior applications. Available within the Punched and Quilted Collections.
  • Grade 87 Fire Rated Backing Sheet Grade (BLF, Nominal Thickness .028" (0.7mm))
    Non-decorative surface; light duty interior use, fire-rated backing sheet for balancing and moisture control of laminate panels. Available on selected Fire-Rated Laminate Backing Sheet items.
  • Grade 89 Fire Rated Backing Sheet Grade (BCF, Nominal Thickness .048" (1.2mm))
    Non-decorative surface; general purpose interior use fire-rated backing sheet for balancing and moisture control of laminate panels. Available on selected Fire-Rated Laminate Backing Sheet items.
  • Grade 91 Backing Sheet Grade (BKL, Nominal Thickness .020" (0.7mm))
    Non-decorative surface; light duty interior use backing sheet for balancing and moisture control of laminate panels. Available on selected Backing Sheet items.
  • Grade 92 Backing Sheet Grade (BKH, Nominal Thickness .048" (1.2mm))
    Non-decorative surface; general purpose interior use backing sheet for balancing and moisture control of laminate panels. Available on selected Backing Sheet items.
  • Grade A3 Chemtop2 Postforming Grade (Nominal Thickness .038" (1.0mm))
    Chemtop2 Postforming Grade designed for interior horizontal and vertical surfaces where resistance to chemicals is necessary. Ideal postforming temperature is 288°F (142°C). Formica Chemtop2 can be postformed to a minimum 1/2" (12.7mm) outside radius and 3/16" (4.8mm) inside cove radius.
  • Grade BA Vertical Postforming Grade (VGP, Nominal Thickness .028" (0.7mm))
    Outside and inside radii to 3/8"(9.5mm). A forming grade designed for vertical or light duty horizontal interior applications requiring radiused edges. Thinner than Grade 12; excellent for postformed radii. Installed panel width not to exceed 24" (609.6mm) maximum. Available on Cabinet Liners.
  • Grade C2 Backing Sheet Grade (BKH, Nominal Thickness, .030" (0.8mm))
    Non-decorative surface; general purpose interior use backing sheet for balancing and moisture control of laminate panels. Available on selected Backing Sheet items.
  • Grade C9 Cabinet Liner Grade (CLS, Nominal Thickness .020" (0.5mm)
    Non decorative surface; light duty interior use cabinet liner for balancing and moisture control of laminate panels. Available on Cabinet Liners.
  • Grade CC ColorCore2 Solid Color Laminate Grade (HCS, Nominal Thickness .040" (1.0mm))
    No visible "dark line" compared to standard laminates. Available on ColorCore2 Special Laminate Product.
  • Grade F1 Fire-rated Compact Structural Laminate Grade (Nominal Thickness .500" (1.27mm))
    Two-sided decorative panel with blackcore; recommended for horizontal and vertical interior applications. Available on all Solid Colors, Patterns and Woodgrains.
  • Grade F5 Fire-rated Compact Structural Laminate Grade (Nominal Thickness .750" (1.91mm))
    Two-sided decorative panel with blackcore; recommended for horizontal and vertical interior applications. Available on all Solid Colors, Patterns and Woodgrains.
  • Grade F8 Fire-rated Compact Structural Laminate Grade (Nominal Thickness .1000" (2.54mm))
    Two-sided decorative panel with blackcore; recommended for horizontal and vertical interior applications. Available on all Solid Colors, Patterns and Woodgrains.
  • Grade FG frpSelect General Purpose Vertical Grade (HGV, Nominal Thickness .090" (2.3mm))
    Recommended for vertical interior applications. Available on frpSelect items only.
  • Grade P7 Compact Structural Laminate Grade (Nominal Thickness .250" (6mm))
    Two-sided decorative panel with blackcore; recommended for horizontal and vertical interior applications. Available on all Solid Colors, Patterns and Woodgrains.
  • Grade P8 Compact Structural Laminate Grade (Nominal Thickness .625" (15.9mm))
    Two-sided decorative panel with blackcore; recommended for horizontal and vertical interior applications. Available on all Solid Colors, Patterns and Woodgrains.
  • Grade R3 Compact Structural Laminate Grade (Nominal Thickness 1.00" (25.4mm))
    Two-sided decorative panel with blackcore; recommended for horizontal and vertical interior applications. Available on all Solid Colors, Patterns and Woodgrains.
  • Grade S2 Compact Structural Laminate Grade (Nominal Thickness .125" (3.175mm))
    Two-sided decorative panel with blackcore; recommended for horizontal and vertical interior applications. Available on all Solid Colors, Patterns and Woodgrains.
  • Grade S6 Compact Structural Laminate Grade (Nominal Thickness .500" (12.7mm))
    Two-sided decorative panel with blackcore; recommended for horizontal and vertical interior applications. Available on all Solid Colors, Patterns and Woodgrains.
  • Grade S7 Compact Structural Laminate Grade (Nominal Thickness .750" (19mm))
    Two-sided decorative panel with blackcore; recommended for horizontal and vertical interior applications. Available on all Solid Colors, Patterns and Woodgrains.
  • Grade S8 Compact Structural Laminate Grade (Nominal Thickness .375" (10mm))
    Two-sided decorative panel with blackcore; recommended for horizontal and vertical interior applications. Available on all Solid Colors, Patterns and Woodgrains.
  • Grade S6 Compact Structural Laminate Grade (Nominal Thickness .500" (12.7mm))
    Two-sided decorative panel with blackcore; recommended for horizontal and vertical interior applications. Available on all Solid Colors, Patterns and Woodgrains.
FINISH DEFINITIONS
  • Natural (-00)
    Non-decorative finish. Available on Backing sheets.
  • Brushed (-09)
    A classic, linear brushed finish that runs lengthwise on the laminate sheet. Recommended for horizontal and vertical interior applications. Available on selected Authentix Collection items.
  • Quilted (-15)
    Raised harlequin diamond pattern that runs lenghtwise on the laminate sheet. Recommended for vertical interior application due to its deep texture. Available only on selected Authentix Collection items.
  • Sparkle* (-42)
    A small-scale textured finish which imparts a brighter, more durable surface. Recommended for horizontal and vertical interior applications. Available on all Solid Colors, and Patterns.
  • Artisan (-43)
    A look reminiscent of the hand-rubbed, oiled finish used by craftsmen to produce fine wood surfaces. Recommended for light-duty horizontal or vertical interior application. This finish is not recommended for heavy-duty horizontal applications such as countertops. Available on selected Woodgrains.
  • Punched (-45)
    Small embossed square shapes that produce an architectural effect. Recommended for vertical interior application due to its deep texture. Available on selected Authentix Collection items.
  • Etchings* (-46)
    A softly polished and etched surface dappled with highlights from tiny fractures and fissures reminiscent to those found in natural granite and stone. Recommended for horizontal and vertical interior applications. Available on specific colors within the Etchings Collection.
  • Powdered (-47)
    An understated textural, non-directional finish that imparts a subtle glossy finish, Recommended for horizontal and vertical interior applications. Available on selected Authentix Collection items.
  • Matte (-58)
    A finish that imparts a warm, pleasing effect that enhances the beauty of color and produces a greater clarity and depth. Recommended for horizontal and vertical interior applications. Available on all Solid Colors, Patterns, and Woodgrains.
  • Honed* (-77)
    A low sheen satin finish with subtle surface clefts and crevices that mimic softly brushed stone. Recommended for horizontal and vertical interior applications. Available on specific colors within the Honed Collection.
  • Polished (-90)
    A high-gloss finish ideal for applications that require maximum smoothness and reflectance. Recommended for light-duty horizontal or vertical interior applications. This finish is not recommended for heavy-duty horizontal applications such as countertops. Available on all Solid Colors, Patterns, and Woodgrains.
  • Chemtop2 (CT)
    This finish resists chemicals, stains, impact, and heat. Recommended for horizontal and vertical interior applications. Available on specific colors within the Chemtop2 - Special Laminate Product.
  • Velour (FV)
    A non-directional, satin finish that is smooth to the touch. Recommended for horizontal and vertical interior applications. Available on specific colors within the ColorCore2 - Special Laminate Product.
  • Luxe (LX)
    Contrasting matte wood tick structure in a polished background gives a realistic finish depth and adds elegance to wood surfaces. Recommended for horizontal and vertical interior applications. Available on selected Woodgrains.
  • MicroDot (MC)
    A low-sheen finish with subtle, with concave circles arranged in a tight grid formation. Recommended for horizontal and vertical interior applications. Available on specific colors within the MicroDot Collection and ColorCore2 - Special Laminate Product.
  • Naturelle (NT)
    Subtle straight grain ticking creates a realistic natural wood look and low sheen finish. Recommended for light-duty horizontal or vertical interior application. This finish is not recommended for heavy-duty horizontal applications such as countertops. Available on selected Woodgrains.
  • Radiance* (RD)
    Shimmering brilliant smooth gloss finish is penetrated with texture. It is complimented by 3D holographic facets that refract and reflect light in natural-veined patterns highlighting stone and granite looks. Recommended for horizontal and vertical interior applications. Available on specific colors within the Radiance Collection.
  • Riverwash* (RW)
    This finish features registered, low lustre, dual gloss texture to mimic the aggregate stones in concrete and rusted elements in metals. Recommended for horizontal and vertical interior applications. Available on specific colors within the Riverwash Collection.
  • Sculpted (SP)
    Horizontal lines meander across the laminate sheet in a slightly undulating fashion. Recommended for light-duty horizontal and vertical interior applications. This finish is not recommended for countertops. Available on specific colors within the Sculpted Collection.
* PREMIUMfx™ by Formica® (Premium finishes - Recommended for Residential applications)